Anycubic Resin UV LCD 1kg White
|Enter your email|
|Shipping within||24 hours|
|The Availability Of||0 awry.|
|The bar code||0605175698337|
The resin is stable in a variety of environmental conditions and also aids storage by overcoming the shortcomings of other resins that get wet easily, soften and work normally. They ensure the strength of moldings and inhibit maximum shrinkage, but also improve printing, shorten curing time and maximize the printing efficiency of LCD machines. Strong adhesion and pull to peel off. Not only accuracy and precision are tested, but also minimization of resin release force and adhesion so that the model is supported on a viewing platform, and the low viscosity makes it easy to clean the machine and the model.
Store away from light in primary (sunlight contains a lot of UV which solidifies the photosensitive resin. Light has no effect unless it is UV light).
It is recommended to form at an ambient temperature of 15℃-35℃ (the higher the temperature, the higher the viscosity of the resin). Closed packaging, extreme dust, or moisture can affect print quality.
The resin has a shelf life of up to 18 months.
1. Stir well before use - do not use the resin in a place with strong sunlight.
2. Before use, apply the agent to apply the action from the skin and the liquid handling method.
3. When used with leather, the amount of water to rinse is used. If things go wrong, seek medical attention in a timely manner.
4. Printed models should be considered high concentration alcohol - about 30 seconds (recommended from 95% or more, the higher the better).
Curing wavelength: 405 nm